Showing 977–992 of 1357 results
-
REQUEST A QUOTE
- Specification Parameter: Details & Values
- Channels: 1 input / 1 output
- Power Supply: 18 ~ 60 V DC
- Input Signal: 4 ~ 20mA, HART
- Input Line Resistance: Approx. 75Ω
- Available Voltage: Open-circuit voltage ≤ 26V; ≥ 16V at 20mA
- Output Signal: 4 ~ 20mA, HART
- Load Resistance: RL ≤ 550 Ω
- Transfer Accuracy: 0.1 % F.S.
- Temperature Drift: 30 ppm/°C
- Response Time: ≤ 2 ms
- Power Dissipation: 1.3 W
- Safety Integrity Level: Certified SIL3.
- Safe State Indicator: The output signal drops below 3.6mA or exceeds 21.5mA to flag faults.
- Galvanic Isolation: Full galvanic isolation between input, output, and power supply channels.
- Insulation Resistance: ≥ 100 MΩ (Input / Output / Power supply).
- Product Approvals: NEPSI, SIL, CE, FCC, CCS, CCC.
- Operating Temperature: -20 °C to +60 °C
- Storage Temperature: -40 °C to +80 °C
- Mounting Location: Must be mounted in a safe area and connected to intrinsically safe apparatus in hazardous areas (Zone 0, Zone 1, Zone 2, ⅡA, ⅡB, ⅡC, T4 ~ T6).
- Connection Method: Screw connection.
- Mounting Type: DIN 35 mm rail.
- Dimensions: 12.8mm (W) × 110mm (H) × 117mm (D).
Brand New NewPwR NPEXA-CM31 Analog Input Safety Barrier (NPEXA Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Connectors: One 68-pin male SCSI connector for direct ribbon/shielded cable assembly, alongside 68 screw terminals for custom wire routing.
- Orientation: It features a vertical-mounted connector. (Note: If you need a right-angle layout instead, look for the NI CB-68LPR variant).
- Form Factor: Includes physical standoff feet. It is suitable for flat desktop use or for mounting directly into a custom panel layout.
- Dimensions: 5.65 x 4.23 x 1.18 inches (14.35 x 10.74 cm).
- Voltage & Mapping: The block passes signals through on a 1-to-1 pin mapping to your DAQ board. It acts as a passive connector and does not change the voltage limitations of your specific hardware system.
Brand New NI CB-68LP 68-Pin Connector Block (CB Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Analog Input (AI): 8 Single-Ended / 4 Differential
- AI Resolution: 16-bit
- AI Max Sample Rate: 50 kS/s
- Input Voltage Range: ± 10 V
- Analog Output (AO): 2 Channels
- Digital I/O (DIO): 13 Bidirectional Lines
- Counter/Timer: 1 Channel (32-bit)
- Connectivity: Screw-Terminal Blocks
- Bus Interface: USB 2.0
- FIFO Buffer Size: 2,047 samples
Brand New NI USB-6002 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Nidec Corporation
- Model / Series: B35502-35DEL7 (BETAV TA450DC)
- Dimensions: 120 mm x 120 mm x 38 mm (12038 standard)
- Rated Voltage: 12V DC
- Current Draw: 1.40A (Note: Some variants label 1.54A)
- Power Consumption: 16.8 Watts
- Fan Speed: 4,000 to 4,200 RPM
- Maximum Airflow: 160 CFM
- Static Pressure: 0.883 in H₂O
- Acoustic Noise: 56.5 dBA
- Bearing Type: Dual Precision Ball Bearings
- Housing Material: PBT Plastic (UL94V-0 flammable rating)
- Black Wire: Ground (GND) (-)
- Red Wire: Power (12V) (+)
- Yellow or White Wire: Tachometer / RPM Signal (Sensor)
- Blue Wire: PWM Speed Control Input
- Dell Part Numbers: D8794, 0D8794, PP749-A00
- Common Applications: Dell Precision 390, T7500 workstations, and 12cm high-density server chassis.
Brand New NIDEC B35502-35DEL7 Axial Server Cooling Fan (TA450DC Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Nidec Servo Corporation (Japan)
- Model Number: D1751S24B6CZ-16 (also referenced as D1751S24B6CZ16)
- Fan Type: Industrial DC Axial Flow Fan
- Dimensions: 172 mm × 172 mm × 51 mm (Standard 17251 frame)
- Frame Material: Full round aluminum frame with plastic impeller blades
- Rated Voltage: 24 VDC
- Rated Current: 1.8 A
- Power Consumption: 43.2 W
- Maximum Fan Speed: 6,950 RPM ± 10%
- Maximum Airflow: 16.5 m³/min (≈ 582 CFM)
Brand New NIDEC D1751S24B6CZ-16 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Feature / Attribute: Normal Duty Specifications
- Rated Motor Power: 3.0 kW / 5.0 HP
- Continuous Output Current: 6.9 A (at 2 kHz to 12 kHz switching)
- Input Voltage Range: 3-Phase, 380 VAC to 480 VAC (±10%)
- Input Frequency: 50 / 60 Hz
- Frame Size: Size 1
- Control Modes: Open Loop Vector, Closed Loop, RFC, V/Hz, Servo, Regenerative
- Enclosure Rating: IP20
- Shipping Weight: Approx. 6 kg (13.2 lbs)
- Universal Feedback Interface: Equipped with a high-resolution universal encoder port that natively supports up to 14 different feedback types (including incremental, SinCos, SSI, and EnDat encoders).
Brand New NIDEC SP1404 Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Feature / Attribute: Specification Profile
- Panel Size & Type: 15.0 inches diagonal / a-Si TFT-LCD
- Native Resolution: 1024 × 768 pixels (XGA format, 4:3 aspect ratio)
- Pixel Arrangement: RGB Vertical Stripe
- Active Display Area: 304.128 (W) × 228.096 (H) mm
- Outline Dimensions: 326.5 (W) × 253.5 (H) × 14.6 (D) mm (Variant dependent)
- Luminance (Brightness): 400 cd/m² (Typical)
- Contrast Ratio: 600:1 (Typical, Transmissive mode)
- Display Colors: 262K (6-bit) or 16.7M (6-bit + Hi-FRC)
- Viewing Angles: 80° / 80° / 80° / 80° (Left/Right/Up/Down, Typical @ CR ≥ 10)
Brand New NLT NLB150XG01L-01 LCD Screens. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Dimensions: 172 mm × 150 mm × 38 mm
- Rated Voltage: 220V AC (Single Phase, 50/60 Hz)
- Input Power: 40W to 42W
- Airflow Capacity: Up to 212–225 CFM
- Rotational Speed: ~2,700 to 3,200 RPM
- Noise Level: 53 to 56 dBA (Note: General consumer descriptions may list lower levels, but industrial datasheets specify typical noise levels around 53–56 dB due to high airflow)
- Termination: 2-wire connection
- Bearing Type: Dual Ball Bearing
Brand New NMB 5915PC-22W-B30-SM1 AC Axial Cooling Fan (5915 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Rectifier Type: Half-Wave
- Input Voltage Range: 200V AC to 480V AC (±10%)
- Output Voltage Range: 90V DC to 215V DC
- Housing Color: Yellow (standard color coding for NORD's 230–480V series rectifiers)
- Mounting Type: Motor terminal box or DIN-rail / panel mount
- Protection: Integrated suppression circuitry to protect the brake coil from voltage spikes
- De-energize first: Always disconnect and lock out the main AC power supply before opening the motor terminal box.
- Match voltages exactly: Ensure your incoming supply falls within the 230–480V AC limit. Applying a mismatched voltage can permanently burn out your DC brake coil or destroy the internal diodes of the rectifier.
- Professional installation: Installation, wiring, and testing should strictly be performed by a licensed industrial electrician or certified drive technician.
Brand New NORD GHE40L(19141010) Rectifier. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Compatible Cylinder Series: Designed for several Norgren ISO/VDMA profile cylinder ranges, including the DA/8000, PRA/182000, PRA/8000, RA/8000, and RA/181/182 series.
- Seal Material: High-grade polyurethane, which offers high impact resistance, efficient low-friction operation, and a long operational lifespan.
- Kit Contents: Comes as a complete overhaul set including all necessary O-rings, pneumatic seals, linear seals, and a grease pack for proper lubrication during reassembly.
Brand New Norgren QA/8032/00 Cylinder Service Seal Kit (QA Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Transmission Rate: Transmits at 100 Mb baud over single-mode fiber.
- Fiber Requirements: Optimized for 9/125 μm single-mode fiber-optic cable.
- Wavelength & Attenuation: Operates at a 1310 nm wavelength with a maximum attenuation allowance of 30 dB.
- Connectors: Built with LC-style fiber connectors.
- Dual Node Capacity: Each card can accommodate up to two node addresses simultaneously (e.g., servicing an NFS2-640 panel and an NCA-2 annunciator at once).
- Isolation: Complete optical isolation eliminates ground loops and provides high environmental noise immunity.
- Network Wiring Resilience: Supports both NFPA Style 4 (Class B) and Style 7 (Class A) topologies.
- System Integration: Fully supports panel database uploads and downloads through the High-Speed NFN.
- Compatible Hardware: Universally integrates with Notifier ONYX series panels and network infrastructure, including the N16, NFS-320, NFS-640, NFS2-640, NFS-3030, NFS2-3030, NCA/NCA-2 Network Control Annunciators, NCD, and DVC Digital Voice Command units.
Brand New NOTIFIER HS-NCM-SF Network Communications Module (HS-NCM Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Electrical Angle: 355°
- Mechanical Rotation: 360° continuous (no stop limits)
- Resistance: 5 kΩ
- Resistance Tolerance: ±20%
- Independent Linearity: ±0.08% (Standard industrial variance, high-spec options down to ±0.025% can be custom requested)
- Repeatability: 0.007°
- Maximum Operational Speed: 2000 RPM
- Max Operating Voltage: 42 V
- Service Life: Designed for 100 × 10⁶ typical movements
- Protection Class: IP65 rated housing (dust-tight and protected against water jets).
Brand New NOVOTECHNIK IP-6501-A502 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Electrical Stroke: 50 mm
- Measurement Type: Passive, absolute potentiometric
- Resolution: Better than 0.01 mm
- Mechanical Mounting: Free-from-backlash pivot heads with ±12.5° angle of movement
- Environmental Protection: IP65 (dust-tight and water-jet resistant)
- Operational Lifespan: Up to 50 million movements (application dependent)
- Component Materials: Anodized aluminum housing; AISI 303 stainless steel actuating rod
- Electrical Interface: Available in a 4-pin M12 round connector or a 1m shielded PVC cable
- Pivot Head Design: The integrated rod-end pivot bearings compensate for parallel or angular tracking misalignments up to ±12.5°, ensuring smooth linear tracking without binding.
- Robust Internal Tracking: Features a double-beared actuating rod and an elastomer-damped, precious metal multi-finger wiper mechanism to guarantee stable electrical contact during vibration.
Brand New NOVOTECHNIK LWG-0050 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Defined Electrical Range: 75 mm (2.95 in)
- Mechanical Travel: 79 mm (3.11 in)
- Nominal Resistance: 3 kΩ
- Resolution: Better than 0.01 mm
- Housing Length: 201 mm (7.91 in)
- Environmental Protection Rating: IP65 (Dust-tight, water jet resistant)
- Operating Lifespan: Up to 50 million movements (application dependent)
- Housing Material: Anodized Aluminium
- Actuating Rod: Stainless Steel (AISI 303)
- Electrical Connection: 4-pin M12x1 round connector or 1m shielded PVC cable
Brand New NOVOTECHNIK LWG-0075 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer & Part Number: Novotechnik / LWG-0100 (Factory ID: 026104)
- Defined Electrical Stroke: 100 mm (approx. 3.94 inches)
- Nominal Resistance: 3 kΩ (±20% tolerance)
- Independent Linearity: ±0.1%
- Resolution: Better than 0.01 mm
- Maximum Operating Voltage: 42 V DC
- Output Type: Analog Voltage Divider (Passive)
- Electrical Connection: M12 × 1 Thread, 4-pin, A-coded connector
- Environmental Protection: IP65 rated (Dust-tight and water-jet resistant)
- Operating Temperature: Up to 100°C (212°F)
Brand New NOVOTECHNIK LWG-0100 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Novotechnik (Germany)
- Series: LWG (Linear with Pivot Head Mounting)
- Defined Measuring Length: 130 mm (5.12 inches)
- Technology: Potentiometric (Conductive Plastic)
- Resolution: Better than 0.01 mm (infinite resolution)
- Environmental Protection: IP65 rated (dust-tight and water-jet resistant)
- Mechanical Mechanical Life: Up to 50 million movements
- Housing Material: Anodized Aluminum
- Actuating Rod: Stainless steel (AISI 303), rotatable
- Permissible Angular Movement: Up to ±12.5° alignment tolerance
Brand New NOVOTECHNIK LWG-0130 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
