Showing 1169–1184 of 1357 resultsSorted by latest
-
REQUEST A QUOTE
- Component Type: Replacement UV Power Sensing Tube with Base
- Operating Temperature: -40°F to +250°F (-40°C to +121°C)
- Dimensions: Height: 69 mm
- Diameter: 19 mm
- Weight: 0.038 kg (0.08 lbs)
- Tariff Code: 85408900
- Flame Amplifiers: Compatible with Honeywell R7849A/B UV flame amplifiers used in standard 7800 SERIES Burner Management Systems.
- Fuel Profiles: Engineered to monitor ultraviolet radiation from gas-, oil-, and coal-fired burners.
- High-Temperature Environments: If installing the companion primary detector in areas exceeding the baseline temperature limit, utilize specialized Honeywell F leadwires (Specification No. 32004766-003). This specialized wiring is continuously rated up to 400°F (250°C).
- Wiring Considerations: For non-high-temperature sections, utilize moisture-resistant No. 14 AWG wire rated for the peak ambient temperatures expected inside the burner enclosure.
Brand New HONEYWELL 129464N Photocell. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Component Type: Replacement Ultraviolet (UV) Flame Sensing Power Tube.
- Temperature Rating: 0°F to 250°F (-18°C to 121°C).
- Primary Applications: Industrial burners, commercial boilers, central furnaces, public ovens, and intense combustion systems.
- Country of Origin: United States (USA).
Brand New HONEYWELL 129464M Photocell. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Part Number: 19350
- Input Voltage: 10–30 V DC (12V DC / 24V DC nominal)
- Output Type: 1 x NPN Transistor Digital Output
- Response Time: 0.2 ms (200 μs)
- Sensing Beam: Visible Red Light (660 nm wavelength)
- Connection Type: Pre-wired 2 m (6.5 ft) cable with bare end flying leads
- Housing Material: Thermoplastic
- Environmental Rating: IP50, NEMA 1
- Operating Temperature: -10°C to +55°C
- Sensing Range: Dependent upon the specific fiber optic assembly attached
Brand New BANNER DF-G1-NS-2M Proximity Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Beam: Visible Red Light (Wavelength: 680 nm)
- Input Voltage: 12–24 V DC
- Output Type: Dual Discrete PNP Transistor (150mA max load)
- Response Time: Ultra-fast: Selectable between 50 μs, 200 μs, 1 ms, and 2.5 ms
- Housing Material: Thermoplastic housing with a Polycarbonate (PC) cover
- Environmental Rating: IP50; NEMA 1
- Operating Temp: -10 to +55 °C
- Connection Type: Pre-wired 2 m (6.5 ft) cable with bare-end flying leads
- Required Fiber: Banner P-Series plastic fiber optic cables (T5 Termination)
- Application Variant Notice: Note that there is a highly specialized version of this unit designated as D10DPFP-10788 (Part #10788). This specific variant is hardware-modified for high-speed pharmaceutical pill-counting applications and features a truncated 0.840 m cable rather than the standard 2 m line. Double-check your current hardware markings to verify which baseline you need.
Brand New BANNER D10DPFP Sensor Amplifier. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Output Type: Bipolar: 1 x NPN and 1 x PNP discrete digital outputs
- Supply Voltage: 10 V DC to 30 V DC (12V / 24V nominal)
- Sensing Beam: Visible Red Light, 680 nm wavelength
- Response Time: 200 ms / 0.2 seconds
- Repeatability: 66 to 100 μs
- Adjustment Interface: TEACH mode button with a dynamic bar-graph display
- Connection Type: 2-meter (6.5 ft) pre-wired cable with bare-end flying leads (6 pins)
- Housing Material: Thermoplastic with a Polycarbonate (PC) cover
- Environmental Protection: IP50, NEMA 1 (intended for indoor DIN-rail tracks)
- Operating Temperature: -20°C to +55°C (-4°F to 131°F)
Brand New BANNER D10BFP 74036 Photoelectric Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Part Number: 73121
- Sensing Beam: Visible Red LED
- Response Time: 0.2 ms (200 µs) / High-Speed
- Input Voltage: 10–30 V DC
- Output Type: 1 x Single Discrete Transistor (NPN/PNP configuration)
- Physical Interface: Pre-wired 2 m (6.5 ft) 4-wire cable with bare ends
- Housing Dimensions: 11 mm Width x 68.1 mm Length x 35.9 mm Depth
- Mounting: 35 mm DIN Rail mount
- Environmental Protection: IP50, NEMA 1 rated
- Operating Temperature: -20 °C to +55 °C (-4 °F to +131 °F)
Brand New BANNER D10AFPY Sensor Amplifier. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Baumer
- Mounting Type: Flush / Shielded
- Output Circuit: Push-Pull (NPN/PNP selectable depending on wiring)
- Maximum Output Current: < 100 mA
- Current Consumption (No Load): Max. 15 mA
- Switching Frequency: < 35 Hz
- Dimensions: 52.4 mm (Length) x 25 mm (Width) x 6 mm (Depth)
- Housing Material: Polyamide (PA 12)
- Connection Type: 2-meter PVC Cable (3 × 0.14 mm²)
- IP Protection Rating: IP 65
Brand New BANNER CFDK-25G1125-LN4 Proximity Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
Technical Specifications
- Defined Electrical Range (Stroke Length): 150 mm (5.91 in).
- Measurement Method: Passive, absolute potentiometric.
- Resolution: Better than 0.01 mm.
- Operating Voltage: Up to 42 V maximum.
- Protection Class: IP65 standard (dust-tight and protected against water jets).
- Mechanical Connection: Dual-beared, rotatable stainless steel actuating rod integrated with backlash-free pivot heads.
- Housing Material: Anodized aluminum.
- Electrical Connection: Typically equipped with standard M12 connector models.
- Lifespan: Up to 50 million movements, depending on the specific application.
- High Immunity to Noise: Because it is a passive absolute measuring system, the sensor is inherently insensitive to external electrical interference or magnetic disturbances.
- Flexible Alignment: The backlash-free pivot head mounting allows for a broad angle of free mechanical movement (up to ±12.5°), eliminating binding or mechanical strain in dynamic applications.
- Outstanding Linearity: Provides precise physical-to-electrical signal scaling across the entire 150 mm operational profile.
Brand New NOVOTECHNIK LWG-0150 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Novotechnik (Germany)
- Series: LWG (Linear with Pivot Head Mounting)
- Defined Measuring Length: 130 mm (5.12 inches)
- Technology: Potentiometric (Conductive Plastic)
- Resolution: Better than 0.01 mm (infinite resolution)
- Environmental Protection: IP65 rated (dust-tight and water-jet resistant)
- Mechanical Mechanical Life: Up to 50 million movements
- Housing Material: Anodized Aluminum
- Actuating Rod: Stainless steel (AISI 303), rotatable
- Permissible Angular Movement: Up to ±12.5° alignment tolerance
Brand New NOVOTECHNIK LWG-0130 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer & Part Number: Novotechnik / LWG-0100 (Factory ID: 026104)
- Defined Electrical Stroke: 100 mm (approx. 3.94 inches)
- Nominal Resistance: 3 kΩ (±20% tolerance)
- Independent Linearity: ±0.1%
- Resolution: Better than 0.01 mm
- Maximum Operating Voltage: 42 V DC
- Output Type: Analog Voltage Divider (Passive)
- Electrical Connection: M12 × 1 Thread, 4-pin, A-coded connector
- Environmental Protection: IP65 rated (Dust-tight and water-jet resistant)
- Operating Temperature: Up to 100°C (212°F)
Brand New NOVOTECHNIK LWG-0100 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Defined Electrical Range: 75 mm (2.95 in)
- Mechanical Travel: 79 mm (3.11 in)
- Nominal Resistance: 3 kΩ
- Resolution: Better than 0.01 mm
- Housing Length: 201 mm (7.91 in)
- Environmental Protection Rating: IP65 (Dust-tight, water jet resistant)
- Operating Lifespan: Up to 50 million movements (application dependent)
- Housing Material: Anodized Aluminium
- Actuating Rod: Stainless Steel (AISI 303)
- Electrical Connection: 4-pin M12x1 round connector or 1m shielded PVC cable
Brand New NOVOTECHNIK LWG-0075 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Electrical Stroke: 50 mm
- Measurement Type: Passive, absolute potentiometric
- Resolution: Better than 0.01 mm
- Mechanical Mounting: Free-from-backlash pivot heads with ±12.5° angle of movement
- Environmental Protection: IP65 (dust-tight and water-jet resistant)
- Operational Lifespan: Up to 50 million movements (application dependent)
- Component Materials: Anodized aluminum housing; AISI 303 stainless steel actuating rod
- Electrical Interface: Available in a 4-pin M12 round connector or a 1m shielded PVC cable
- Pivot Head Design: The integrated rod-end pivot bearings compensate for parallel or angular tracking misalignments up to ±12.5°, ensuring smooth linear tracking without binding.
- Robust Internal Tracking: Features a double-beared actuating rod and an elastomer-damped, precious metal multi-finger wiper mechanism to guarantee stable electrical contact during vibration.
Brand New NOVOTECHNIK LWG-0050 Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Mains Voltage: 208 to 480 V AC ± 15% (Auto-detecting range)
- Output Type: 1 × SPDT (Single Pole Double Throw / 1 Form C changeover relay)
- Contact Switching Current: Max 5 A at 250 V AC
- Frequency Range: 50 Hz to 60 Hz (± 10%) sinusoidal waveform
- Reaction Time: ≤ 200 ms (Phase loss) / ≤ 100 ms (Sequence error)
- Mounting Format: Ultra-compact 17.5 mm width profile for standard DIN-rail
- LED Indicators: Green LED: Power Supply ON / Yellow LED: Output Relay Active
- Certifications: CE, UL listed, CSA approved, RoHS compliant
- Meaning of the Part Number: DPA51CM44 B104
Brand New CARLO GAVAZZI DPA51CM44 B104 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Parameters: Phase Loss & Phase Sequence
- Mains Voltage Range: 208 to 480 VAC (±15%)
- Frequency Range: 50 to 60 Hz (±10%)
- Output Configuration: 1 x SPDT (Single Pole Double Throw / 1 Form C)
- Contact Rating: 5 A @ 250 VAC
- Mounting Type: DIN-rail (17.5 mm width)
- Time Delay: No delay adjustment (instantaneous reaction)
- IP Rating: IP20 (finger-safe protection)
- Safety Certifications: UL, CSA, CE
- Phase Loss Detection: If any one of the three phases goes dead or drops below the activation threshold (<85% of the rated phase-to-phase voltage), the relay immediately de-energizes. This prevents motors from running on two phases ("single-phasing"), which leads to rapid overheating, torque reduction, and eventual motor burnout.
Brand New CARLO GAVAZZI DPA51CM44 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Parameter: Phase Sequence & Phase Loss
- Supply/Monitoring Voltage: 380 to 415 V AC (± 15%, 50-60 Hz)
- Trip Range: 323 to 475 V AC
- Output Type: SPDT (1 Form C) relay, normally energized
- Housing Dimensions: 22.5 mm Euronorm industrial housing
- Mounting Style: DIN-rail mount (DIN/EN 50 022)
- Ingress Protection: IP20
- Operating Temperature: -20°C to 60°C (-4°F to 140°F)
- Visual Indicators: LED indicator for relay ON status
- Regenerated Voltage Detection: The DPA02CM40 can detect partial phase loss even if the spinning motor regenerates voltage back into the missing line (detects up to 85% of the nominal voltage).
Brand New CARLO GAVAZZI DPA02CM40 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Carlo Gavazzi
- Product Series: DPA01 Series (Euronorm Housing)
- Monitoring Functions: Phase Sequence, Total/Partial Phase Loss
- Nominal Voltage Range: 380 to 480 V AC (3-Phase Delta)
- Operating Frequency: 50 to 60 Hz
- Output Configuration: DPDT (Double Pole Double Throw) — 2 Relays
- Housing Width: 22.5 mm (0.89 inches)
- Mounting Type: DIN-rail installation (DIN/EN 50 022)
- IP Rating: IP20 (Finger-safe screw terminals)
- Diagnostics: LED Status Indication (Green for Power, Yellow for Relay)
Brand New CARLO GAVAZZI DPA01DM48 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
