Showing 97–112 of 1357 results
-
REQUEST A QUOTE
- Network Protocol: EtherNet/IP (supports both standard ABB drives profiles and ODVA AC/DC drives profiles).
- Physical Interface: Two RJ-45 Ethernet ports utilizing twisted-pair media.
- Network Topologies: Supports Star, Daisy Chain, and Ring topologies.
- Enclosure Rating: IP20 / NEMA 1 equivalent (designed for indoor/cabinet installation).
- Embedded Switch for DLR: Features an integrated network switch that natively supports Device Level Ring (DLR). This allows you to construct a redundant, fault-tolerant Ethernet ring network without purchasing or installing an expensive external DLR switch.
- Rockwell/Allen-Bradley Ecosystem Optimization: Highly optimized for easy integration into Rockwell Automation environments (Studio 5000/Logix platforms) using downloadable Add-On Instructions (AOI) and electronic data sheets (EDS).
- Drive Composer Pro Support: Fully compatible with ABB's PC-based Drive Composer Pro Software, allowing commissioning engineers to perform startup, configuration, and monitoring directly over the Ethernet network.
- Primary Protocols: EtherNet/IP exclusively
- Hardware Performance: Modern chipset, optimized Requested Packet Interval (RPI) processing
Brand New ABB FEIP-21 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model / Part Number: MS132-32 / 1SAM350000R1015
- Current Setting Range: 25.0 to 32.0 A
- Trip Class: Class 10
- Number of Poles: 3P (3-Pole)
- Rated Operational Voltage: Up to 690 VAC
- Protection Degree: IP20 (Housing) / IP10 (Terminals)
- Operating Temperature: -25°C to +70°C
- Advanced Fault Indication: Unlike standard models (like the MS116), the MS132 features a separate, visual trip window that distinguishes between an overload trip and a short-circuit trip at a glance.
- Integrated Disconnect Function: Provides a reliable safety isolation mechanism that fully cuts off power downstream when switched to the "OFF" position.
- Lockable Rotary Handle: Built-in mechanism allows the handle to be padlocked directly in the "OFF" position for Lockout/Tagout (LOTO) safety compliance.
Brand New ABB MS132-32 Motor Starter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Product Identification: Model: OS800D03P | ID: 1SCA022825R4880
- Poles & Configuration: 3-Pole (3 Fuses); Position of line terminals: Top In – Bottom Out
- Voltage Ratings: Insulation
- Short-Circuit Capacity: Conditioned Rated Short-Circuit Current
- Fuse Compatibility: DIN-Type Size 3 (NH3 fuses)
- Operation Mechanism: Front-operated mechanism located at the end of the switch (Left side / "03" position)
- Physical Dimensions: Width: 343 mm | Height: 306 mm | Depth: 233 mm (Net Weight: 13.5 kg / 29.76 lbs)
- Environmental Standards: Protection Class: IP20 (Front Side) | RoHS Compliant: Yes
- Pistol Handle: Typically packaged with an OHB175J12 or OHB145J12 pistol-grip handle.
- Operating Shaft: Includes an OXP12X280 extended shaft (12 mm diameter, 280 mm length) to clear standard panel depths.
Brand New ABB OS800D03P Isolating Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Number of Poles: 3-Pole
- Power Loss: 3.2 W per pole
- Mechanical Durability: 20,000 cycles
- Terminal Type: Lug terminals (Terminal Bolt Kit included)
- Standards: IEC 60947-3
- Handle: Black IP65-rated selector pistol handle (Model: OHB65J6), which is padlockable in the "OFF" position for Lockout/Tagout (LOTO) safety compliance.
- Shaft: Extended selector shaft (Model: OXP6X210).
- Hardware: M12 × 50mm connection bolt kit.
- Emergency & Maintenance Isolation: Allows plant operators to isolate powerful downstream equipment cleanly under full load conditions.
- Lockout/Tagout (LOTO): The pistol handle features built-in padlock holes ensuring a technician can physically lock out the panel during system service to prevent accidental restarts.
Brand New ABB OT160EV03P Isolating Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Number of Poles: 3-Pole (3P)
- Amperage / Current Rating: 16 A (IEC) / 20 A (UL 508 standard)
- Transition Type: Open Transition (Break-before-make design ensures the connection to the primary power source is fully broken before connecting to the secondary source, preventing hazardous backfeeding).
- Contact Position Indication: I-O-II (Source 1 – OFF – Source 2)
- Mounting Configuration: Base mounting or standard DIN rail mounting
- Terminal Type: Protected clamp/screw terminals providing IP20 finger-safe protection.
- Dimensions: 68 mm H x 70 mm W x 68 mm D (2.68" x 2.76" x 2.68")
- Flexible Mechanics: The switch mechanism is front-operated and mounted directly on top of the device, making it highly accessible inside compact control panels.
Brand New ABB OT16F3C Isolating Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Current Rating: 63 A (IEC)
- Max Operational Voltage: 750 V AC (IEC)
- Number of Poles: 3-Pole
- Cable Cross-Section: 1.5 mm² to 35 mm²
- Mounting Capability: DIN-Rail or Base Plate
- Terminal Style: Screw / Protected Clamp
- Standards & Approvals: IEC 60947-3, UL 508, CSA
- Industrial Machinery Safety Lockout: Safely cuts off supply downstream during mechanical lockout/tagout (LOTO) maintenance procedures.
- Motor Control Centers (MCC): Acts as a high-durability, compact isolation link directly feeding sub-panel motor starters or variable frequency drives (VFDs).
- Solar & Building Infrastructure: Utilized as a main AC switch within commercial panelboards and distribution equipment.
Brand New ABB OT63F3 Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer Part Number: 64610805 / 3ABD64610805
- Primary Function: Pulse encoder interface for accurate motor speed/position feedback
- Drive Compatibility: ABB ACS800 series and DCS800 series drives
- Supported Encoder Signals: Differential and single-ended signals
- Supply Voltage Output: Configurable 15 VDC or 24 VDC to power the encoder
- Maximum Frequency: 200 kHz
- Power Consumption: 55 mA from the drive's internal power supply
- Physical Dimensions: 165 mm (H) x 115 mm (L) x 40 mm (W) (Note: Standard card width is approx 40 mm)
- Net Weight: 0.35 kg (0.77 lbs)
- High-Accuracy Control: Essential for demanding applications (like cranes, winders, and heavy positioning equipment) where standard sensorless vector control cannot deliver exact zero-speed torque or precise speed regulation.
Brand New ABB RTAC-01 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Pneumatic Supply Pressure: Minimum 1.4 bar (20 psi) to Maximum 6.0 bar (90 psi).
- Air Purity Requirement: Must use oil-free, dry, and dust-free instrument air matching DIN/ISO 8573-1 Class 3.
- Vibration Immunity: Exceptional resistance to process plant environments, rated up to 10g at frequencies up to 80 Hz.
- Operating Weight: Net unit weight is 1.7 kg (3.75 lbs).
- Commissioning: Features ABB's proprietary Autostroke and adaptive software gains for real-time control optimization and fully automated configuration.
- Air Line Blowout: Prior to plumbing the pneumatic connections to the 1/4" NPT supply or actuator ports, blow out all air piping lines to remove dust, metal chips, moisture, or dirt particles that could damage the internal sensitive I/P module.
- Wiring Polarity: Unbolt the front varnished cover. Loop power and input signal are shared on the same line. Terminate the positive lead to Terminal 11 and the negative lead to Terminal 12. Do not apply voltage before confirming alignment with the nameplate specs.
- Fail-Action Verification: Note that this unit is Double-Acting (controls pressure on both sides of a piston or diaphragm) and Fail-Freeze. Verify that your process safety protocol tolerates the valve locking in place rather than springing wide open or shut during an emergency electrical trip.
Brand New ABB V18345-1010521001 TZID-C Positioning Valve. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Supply Pressure Range: 1.4 to 6 bar (20 to 90 psi)
- Instrument Air Quality: Must be oil-free, water-free, and dust-free in accordance with ISO 8573-1 (typically Class 3 filtration).
- Shock & Vibration Resistance: Extensively isolated up to 10g across frequencies up to 80 Hz, or 2g up to 300 Hz under severe process vibration.
- Operational Control: Fully automatic self-adaptation of P-gain, I-time, and D-time via local pushbuttons and a built-in LCD screen.
- Weight Metrics: Net instrument weight is 1.7 kg (3.74 lbs); gross shipping weight is approximately 3 to 5 kg depending on bulk factory packaging.
Brand New ABB V18345-1020421001 Positioning Valve. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Form Factor: FlexATX / Small 1U
- Maximum Output Power: 350 Watts
- Dimensions: 81.5 × 150 × 40.5 mm (3.2 × 5.9 × 1.6 inches)
- Efficiency Certification: 80 Plus Gold
- Output Voltages: +3.3V, +5V, -12V, +12V, +5Vsb
- Key Features: Active Power Factor Correction (PFC), Bidirectional Fan Design support, and compliance with RoHS, WEEE, and REACH standards.
- EMI/RFI Compliance: CISPR32 and EN55032; CLASS B.
- ASUS Servers: It is deployed as the single power supply system (Part Number: 90SKP000-M37AN0) for rackmount hardware like the ASUS RS300-E11 Series Servers.
- Supermicro Chassis: It serves as the native internal PSU for the compact Supermicro SuperChassis 721TQ-350B2 (a Mini-ITX enclosure popular for NAS and home server setups).
- Broad Industry Use: It is broadly utilized in Network-Attached Storage (NAS), Industrial PCs (IPC), Home Theater PCs (HTPC), and standalone networking arrays.
Brand New ACBEL FLXA5351A Switching Power Supply. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Rating: 1.5 HP (1.1 kW)
- Input Supply: 3-phase, 380–480 V AC ±10%, 50/60 Hz
- Output Current: 3.3 A (Nominal)
- Frequency Range: 0 to 500 Hz
- Overload Capacity: 150% for 60 seconds (every 10 minutes)
- Control Method: Scalar (V/Hz) control
- Enclosure Rating: IP20 (Cabinet or indoor wall mount)
- Dimensions (HxWxD): 142 mm x 70 mm x 151 mm (approx. 1.0 kg)
Brand New ABB ACS150-03E-03A3-4 Variable Frequency Drive (ACS150 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Rating: 3 kW (approx. 4 HP)
- Output Current: 7.3 A max nominal output
- Input Voltage: 380V to 480V AC, 3-phase, 50/60 Hz
- Enclosure Rating: IP20 (suitable for control cabinet mounting)
- Overload Capacity: 150% for 60 seconds every 10 minutes
- Integrated Hardware: Built-in LCD keypad, speed potentiometer, and brake chopper
- Control Connectivity: 1 analog input, 5 digital inputs, and 1 relay output
Brand New ABB ACS150-03E-07A3-4 Variable Frequency Drive (ACS150 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Rating: 4 kW (5 HP)
- Output Current: 8.8 A
- Input Voltage: Three-phase 380 V to 480 V AC
- Output Frequency: 0 to 500 Hz
- Frame Size: R1
- Enclosure Rating: IP20
- Control Interface: Integrated user keypad and potentiometer
- I/O Capabilities: 5 digital inputs, built-in braking chopper, and pre-defined application macros
Brand New ABB ACS150-03E-08A8-4 Variable Frequency Drive (ACS150 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Product ID / Type Designation: 3AUA0000039625 / ACS310-03E-01A3-4
- Rated Motor Power: 0.37 kW (0.5 HP)
- Input Voltage: 380–480 V AC, 3-phase
- Output Current: 1.3 A
- Output Frequency: 0 to 500 Hz
- Control Type: Scalar (V/f) control
- Overload Capacity: 110% for 60 seconds
- Enclosure Rating: IP20 (Must be wall-mounted in a clean environment or cubicle-mounted)
- Frame Size: R0
- Digital Inputs: 5
- Analog Inputs: 2 (configurable)
- Analog Outputs: 1
- Relay Outputs: 1
- Embedded Communication: Modbus RTU (via EIA-485 interface)
- Pump & Fan Control (PFC): Built-in macros to alternate and control multiple pumps or fans based on system demand.
- Application Functions: Integrated PID controllers, sleep mode, energy optimizer, and specialized pump cleaning/maintenance functions.
- Integrated EMC Filter: Includes a built-in C2 EMC filter for the second environment.
- Net Weight: 1.1 kg
- Mounting Type: 35mm DIN rail or wall-mounted via rear screw holes
Brand New ABB ACS310-03E-01A3-4 Variable Frequency Drive (ACS310 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Rating: 0.55 kW / 0.75 HP
- Input Voltage: 380 V to 480 V AC (3-Phase)
- Output Current: 2.1 A
- Enclosure Rating: IP20
- Application Focus: Optimized for centrifugal loads with dedicated features like multi-pump control, pipe cleaning, and energy-efficiency calculators.
- Application: Ideal for HVAC and industrial pump/fan systems.
- Features: Built-in Modbus RTU interface, coated boards for robustness, and uniform dimensions for clean cabinet mounting.
Brand New ABB ACS310-03E-02A1-4 Variable Frequency Drive (ACS310 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Rated Output Power: 0.75 kW (1 HP)
- Output Current: 2.6 A
- Input Voltage: 380 to 480 V AC, 3-phase, 50/60 Hz
- Output Frequency: 0 to 500 Hz
- Enclosure Rating: IP20 (cabinet or wall mount)
- Frame Size: R1
- Dimensions: 169 mm H (239 mm incl. clamps) x 70 mm W x 143 mm D
- Net Weight: Approx. 1.1 to 1.3 kg
Brand New ABB ACS310-03E-02A6-4 Variable Frequency Drive (ACS310 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
