Showing 705–720 of 1357 results
-
REQUEST A QUOTE
- Model Series: Series 72 Modutrol IV
- Actuation Type: Non-Spring Return
- Power Supply: 120V AC, 50/60 Hz
- Power Consumption: 15 VA
- Control Input Signal: Modulating, 4–20 mA current
- Operational Torque: 150 lb-in
- Stroke Range: Adjustable from 90° to 160° (Factory set at 90°)
- Timing / Speed: 30 to 60 seconds nominal travel time
- Crankshaft: 3/8-inch square, dual-ended shaft
- Enclosure Rating: NEMA 3 weather protection (when mounted in an upright position)
Brand New HONEYWELL M7284A1004 Electric Modulating Actuator Motor (Modutrol IV Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Stem Force / Close-off: 600 N (135 lbf)
- Supply Voltage: 24 V AC (50/60 Hz)
- Power Consumption: 4 VA
- Stroke Length: 20 mm (0.79 inches)
- Run Time: 60 seconds (1 minute) for full stroke
- Control Signal: 3-point floating (SPDT)
- Fail-Safe Operation: Non-spring return (fails in place upon power loss)
- Protection Rating: IP54
- Direct-Coupled Installation: Quick and easy installation directly onto the valve body without needing a separate linkage.
- Manual Override: Equipped with a manual control knob that allows mechanical valve adjustments during power outages.
Brand New HONEYWELL ML6420A3007 Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Supply Voltage: 24 Vac
- Stem Force: 600 N (135 lbf)
- Stroke/Lift: 20 mm
- Run Time: 60 seconds (1 minute)
- Power Consumption: 4 VA
- Protection Rating: IP54
- Manual Override: Features an external manual control knob. If power fails, you can adjust the valve manually. Once power is restored, the knob automatically unlocks and hands control back to the system.
- No Calibrations Needed: It features a direct-coupled design with force-limiting microswitches. These switches turn off the actuator precisely when the specified force is hit, saving installation time and protecting the valve.
- Valve Compatibility: Seamlessly operates standard Resideo/Honeywell Home valve series including DE, XE, DF, XF, and V5329C lines.
- Features & Benefits: * Quick and easy installation, no separate linkage required. * Conduit connector is standard. * No adjustment…
Brand New HONEYWELL ML6420A3007-E Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Nominal Stem Force: 1800 N (405 lbf) for heavy-duty applications.
- Stroke Length: 38 mm (1-1/2 inches).
- Power Input: 24 Vac (+10%, -15%), 50/60 Hz.
- Power Consumption: Maximum 11 VA to 16 VA depending on operational frequency.
- Run Time: Approximately 175–210 seconds for a full 38 mm stroke.
- Control Input Signals: Selectable 0…10 Vdc, 2…10 Vdc, 0…20 mA, or 4…20 mA.
- Feedback Signal: 2…10 Vdc position feedback.
- Materials: ABS plastic cover with a rugged die-cast aluminum yoke and base.
- Direct Valve Coupling: Mounts directly onto compatible Honeywell globe valves (such as V5011, V5013, V5015, V5016, and VGF series) without requiring separate linkages or adjustments.
- System Target: Optimally used for larger valves (typically 4 inches and above) due to its high 1800 N force capability.
Brand New HONEYWELL ML7421B8012-E Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Actuator Type: Side Rotary, Adjustable Roller Lever
- Circuit Configuration: SPDT-DB/DM (Single Pole Double Throw, Double Break/Double Make)
- Switch Function: On-Mom (On-Momentary / Spring Return)
- Current Rating: 10 A (AC)
- Voltage Ratings: 125 VAC / 480 VAC
- Ingress Protection: IP67 (Dust-tight and protected against temporary water submersion)
- Termination Style: Screw Terminals (4 Terminals total)
- Adjustable Actuator Positioning: The side rotary lever is equipped with an adjustable roller. This allows you to scale the length or change the contact angle of the lever arm to precisely fit your machine's mechanical trip mechanics.
- Double Break Circuitry: The SPDT (DB/DM) contact architecture features double break mechanisms. This configuration breaks the circuit in two places simultaneously, which helps extinguish electrical arcs more efficiently and extends the electrical operating life under heavy 10A current loads.
- Environmental Sealing: Its IP67 rating ensures the switch operates reliably in demanding, wet, dusty, or dirty indoor/outdoor environments. It can withstand industrial equipment washdowns.
Brand New HONEYWELL SZL-WLC-B Limit Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Control Action: Proportional plus Integral (P+I) or basic On/Off control for stable temperature management.
- Power Supply: 24 Vac.
- Analog: Modulating 2 to 10 Vdc or 4 to 20 mA (reversible) to drive valve or damper actuators.
- Digital: 2A On/Off relay output for secondary sequence control, changeovers, or alarms.
- Temperature Range: Broad reach from -20°C to 110°C when utilizing an external sensor, making it robust enough for steam or chilled water systems.
- Enclosure & Wiring: IP30-rated compact housing that supports wall, panel, or standard DIN rail mounting with plug-in screw terminals.
Brand New HONEYWELL T9275A1002 Thermostat. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Supply: 220/230VAC, 50/60Hz.
- Temperature Setting Range: 10°C to 32°C.
- Operating Ambient Limits: 0°C to 49°C.
- Enclosure Protection: IP20 rating against solid particles.
- Built-in Protections: Integrated low-temperature freeze protection and four distinct keypad locking options.
Brand New HONEYWELL TF428WN/U Thermostat. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Resolution: 800 (RGB) × 480 pixels (WVGA) with a 16:9 widescreen aspect ratio.
- Physical Dimensions: Outline size of 164.9(W) × 100(H) × 5.7(D) mm with an active display area of 153.6 × 86.64 mm.
- Signal Interface: Uses a 60-pin TTL parallel RGB interface via a flexible printed circuit (FPC) connection.
- Display Technology: TN, normally white, transmissive display mode supporting up to 262K/16.2M colors.
- Optical Performance: Typ. brightness of 450 cd/m² and a 500:1 contrast ratio for enhanced daylight visibility.
- Backlight: Integrated white LED (WLED) lighting matrix with a standard JST BHSR-02VS-1 backlight connector.
- Touch Screen: The base factory part does not include built-in touch overlay hardware, though some replacement bundles include an aftermarket touch digitized glass layer pre-attached.
Brand New HannStar HSD070IDW1-E13 TFT LCD Display Module (HSD070 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Size: 7.0 inches (Aspect Ratio 16:9)
- Display Type: TFT LCD Panel
- Resolution: 800 × 480 pixels
- Color Support: 262,144 colors (or up to 16.77 million in updated hardware variants)
- Touch Panel Type: 4-wire resistive touch tablet (high precision, extended operational life)
- Processor (CPU): ARM Cortex-A8 low-power processor
- User Memory: 12 MB Flash (Expandable to 128 MB on later revisions)
- Serial Ports (COM): 2 COM ports (Supporting RS232, RS422, and RS485 communication protocols)
- Ethernet Port: 1 Port (integrated for network communication and PLC linking)
- USB Host: 1 Port
- USB Client: 1 Port
- PLC Compatibility: Features seamless, direct integration with mainstream industrial PLCs without needing extra standalone middleware.
- Industrial Hardening: Features advanced built-in anti-jamming, anti-hypertension, and anti-lightning circuit protection designs.
Brand New Hollysys HT8701TE HMI Touch Screen (HT8701 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Series: EDS 3400 (Electronic Pressure Switch with dual-plane rotatable digital display)
- Mechanical Connection: G1/4 A ISO 1179-2 external thread
- Electrical Connection: M12x1, 4-pin connector
- Modification Number: 000 (Standard design)
- HYDAC Part Number: 923625 or 908129
- Multi-Plane Rotatable Display: The 4-digit digital LED screen can be rotated independently from the fluid connection on two axes. This allows you to mount the device in virtually any orientation while keeping the display perfectly readable.
- Configurable Units: The sensor actively measures and displays pressure in bar, psi, or MPa, auto-converting any saved threshold programming when units are swapped.
- Durable Construction: Utilizes a stainless steel measuring cell with a thin-film strain gauge for extended duty-cycle longevity.
Brand New HYDAC EDS 3446-2-0100-000 Electronic Pressure Switch with Digital Display (EDS 3400 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Mounting Diameter: 22 mm (0.878")
- Number of Positions: 2 positions (90° throw angle)
- Contact Configuration: 1 NO + 1 NC (1A1B)
- Contact Rating: 10A @ 600 VAC/VDC max
- Operator Type: Non-illuminated Knob
- Terminal Type: M3.5 Screw Terminals
- Environmental Protection: NEMA 1, 2, 3, 3R, 4, 4X, 12, 13; IP65
- Certifications: UL Listed, CSA Certified, TUV Approved, CE Marked
Brand New IDEC ASW211 22mm Heavy-Duty Selector Switch (TW Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Supply: 100–240 V AC (50/60 Hz, 36VA)
- Total I/O Count: 10 I/O points
- Inputs: 6 digital inputs (24V DC)
- Outputs: 4 relay outputs (240V AC / 30V DC, 2A)
- Communication: Built-in RS232C port
- Certifications: UL, c-UL, CE, and Class 1 Division 2 for hazardous locations
Brand New IDEC FC4A-C10R2 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- I/O Configuration: 16 total I/O points, split into 9 inputs and 7 relay outputs.
- Power Supply: 100–240 V AC, 50/60 Hz (31 VA consumption).
- Output Rating: 2 A, 24 V DC.
- High-Speed Capabilities: Features 4 built-in high-speed inputs capable of up to 20 kHz handling.
- Networking: Supports a built-in standard RS232C port with datalink capabilities for up to 32 PLCs.
- Certifications: UL, cULus, Class 1 Division 2 (hazardous locations), CE, and ABS Type Approved.
- AFI Systems: Provides independent repair options and certified operational replacements.
- Features: ○Max. 264 I/O○Datalink Up to 32 PLCs○Easy Programming○20 kHz High Speed I/O○Standard RS232C Port, Optional RS485/RS232 Po…
Brand New IDEC FC4A-C16R2 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Supply: 100–240V AC, 50/60 Hz (40VA power consumption)
- I/O Configuration: 24 total built-in I/O points (expandable up to a maximum of 88 I/Os)
- Inputs: 24V DC discrete inputs (includes 4 built-in high-speed counters capable of 20 kHz handling)
- Outputs: 2A Relay outputs rated for 240V AC / 30V DC
- Auxiliary Output: Provides a 24V DC, 250mA auxiliary power source
- Communication: Integrated standard RS232C port (expandable with optional modules)
- Certifications: Class I Division 2 (Groups A, B, C, D) for hazardous locations; CE; cULus; ABS Type Approved
Brand New IDEC FC4A-C24R2 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Supply: 24V DC operating power (often paired with a 230V AC mains transformer or power supply).
- Total I/O Count: 24 built-in I/Os (14 inputs and 10 outputs), expandable up to a maximum of 88 I/Os using expansion modules.
- Inputs: 24V DC inputs, featuring 4 built-in high-speed inputs (up to 20 kHz).
- Outputs: 10 Relay outputs rated at 240V AC / 30V DC, 2A.
- Communication: Built-in standard RS232C port; supports DataLink networking for up to 32 PLCs.
- Certifications: Class I Division 2 (Groups A, B, C, D) for hazardous locations, CE, and cULus.
- Features: ○Max. 264 I/O○Datalink Up to 32 PLCs○Easy Programming○20 kHz High Speed I/O○Standard RS232C Port, Optional RS485/RS232 Po…
Brand New IDEC FC4A-C24R2C PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Supply & Inputs: 24V DC operational power with 12 digital inputs (including 4 built-in high-speed inputs).
- Outputs: 8 total digital outputs, divided into 6 relay outputs and 2 transistor source (PNP) outputs.
- Memory & Capacity: 31.2 kB of memory, capable of expanding up to a maximum of 244 I/Os using external modules.
- Enclosure Rating: IP20 protection rating.
Brand New IDEC FC4A-D20RS1 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
