Showing 673–688 of 1357 results
-
REQUEST A QUOTE
- Module Type: Universal Base Power Supply
- Platform Compatibility: PACSystems RX3i
- Backplane Support: RX3i Universal Backplane only (IC695 catalog numbers)
- Slots Occupied: 2 backplane slots
- Nominal Input Voltage: 120/240 VAC or 125 VDC
- Input Voltage Range: 85 to 264 VAC or 100 to 300 VDC
- Input Power: 70 W max with VDC
- Total Load Capacity: 40 Watts
- Expansion Limits: Up to 4 multi-purpose power supplies (IC695PSA140 and/or DC-equivalent IC695PSD140) can sit on a single RX3i Universal Backplane.
- Increased Capacity Mode: Multiple units seamlessly load-share when the overall system current envelope exceeds what a single module can output.
Brand New GE FANUC IC695PSA140 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer & Series: Gefran — LT Series (With Shaft)
- Part Number: LT-M-0100-S (Factory Code: F003494)
- Useful Electrical Stroke: 100 mm (3.93 inches)
- Ohmic Resistance: 5 kΩ (±20% tolerance)
- Independent Linearity: ±0.05%
- Resolution: Infinite
- Electrical Connection: 4-pole connector (DIN 43650 / ISO 4400 Form A)
- Mechanical Linkage: Pull shaft, M5 or M6 threaded ball joint
- Max Displacement Speed: 5 m/s (16.4 ft/s)
- Ingress Protection (IP): IP60 rating
Brand New GEFRAN LT-M-0100-S Displacement Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Transducer Type: Potentiometer (rectilinear displacement)
- Stroke Length: 130 mm (approx. 5.1 inches)
- Resistance: 5 kOhm standard
- Linearity: ± 0.05%
- Electrical Connection: 4-Pole DIN 43650 Form A connector
- Protection Rating: IP60
- Lifespan: Up to 25 million cycles
Brand New GEFRAN LT-M-0130-S Linear Potentiometer Displacement Transducer (LT-M Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: GESTRA
- Model / MPN: NRG19-50
- Electrode Length (L): 100 mm (determines the low-water switchpoint)
- Mechanical Connection: G ¾ A threaded connection (ISO 228-1)
- Pressure Rating: PN 160 (Nominal pressure capability)
- Max Service Pressure: 100 bar at a temperature of 311 °C
- Measuring Principle: Conductive (utilizes the electrical conductivity of water)
- Body Material: High-grade stainless steel
- Boiler Protection: When the water level drops below the tip of the 100mm electrode, it triggers an instant low-water alarm (LW), cutting power to the boiler heating elements to prevent catastrophic dry-firing damage.
- Self-Monitoring Safety: The system features advanced internal diagnostics. It triggers a safety alarm automatically if the electrode insulation degrades, develops a leak, or suffers an electrical connection failure.
- Installation Requirements: It can be mounted inside a boiler vessel or within an external level pot/standpipe. Per GESTRA Installation Manuals, you cannot install two NRG19-50 limiters inside the same single standpipe.
Brand New Gestra NRG19-50 L=100mm G3/4 PN160 Conductive Level Electrode (NRG19 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Output Type: Linear DC (Low Ripple & Noise)
- Total Power: 195 Watts
- Line / Load Regulation: ≤ 0.01% + 3mV (Constant Voltage mode)
- Ripple & Noise: < 1mVrms (5Hz ~ 1MHz)
- Display: Four separate "3-digits" LED displays (voltage/current for CH1 & CH2)
- Weight: Approx. 7 kg (15.4 lbs)
- Tracking Configurations: Channel 1 and Channel 2 can be configured seamlessly using front-panel switches into three useful operational modes:
- Independent: Functions as two completely separate 0–30V power supplies.
- Series Mode: Internally connects the channels to double the voltage output, providing up to 60V / 3A.
- Parallel Mode: Internally connects the channels to double the current output, providing up to 30V / 6A.
Brand New GWINSTEK GPS-3303C Switching Power Supply. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Instrument System: Core Specification Features & Capabilities
- Digital Oscilloscope: 2 Channels, 250MHz Bandwidth, 1 GSa/s Real-time Sampling Rate • 8M storage depth
- Waveform Generator: 1 Channel, 25MHz Frequency, 12-bit Resolution • 200 MSa/s sampling rate
- Digital Multimeter: 4000 Counts Resolution • Measures AC/DC voltage/current, resistance, capacitance, diode, and continuity
- Interface: Features a 7-inch TFT color capacitive multi-touch screen (800×480 resolution) for intuitive gesture operations.
- Power: Equipped with a massive 10,000mAh detachable lithium battery that supports Type-C 18W fast charging and can function as a temporary power bank.
- Form Factor: Built with an anti-fall, anti-seismic rugged casing and a unique suspension foot stand to allow hands-free benchtop operation.
- Analysis Tools: Features built-in hardware frequency counters, Math functions, FFT spectrum analysis, and up to 42 automatic measurement capabilities.
Brand New Hantek TO1252D Portable Tablet Oscilloscope (TO1000 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Button Configuration: 5 buttons total. This includes 4 directional push-buttons (typically marked Up, Down, East, West or Forward, Back) and 1 Emergency Stop button.
- Speed Levels: 1 single-speed level for directional control.
- Electrical Capacity: Rated for standard industrial loads, generally supporting up to 6A to 10A at 250VAC.
- Casing Material: Built using high-impact, thick ABS resin with anti-slip properties to survive drops and harsh conditions.
- Environmental Protection: Features an IP66 rating, making it highly dust-tight and protected against powerful water jets.
- Safety Feature: The prominent mushroom-head emergency stop switch cuts off power immediately during critical operational failures.
Brand New HANYOUNG HY-1024SBB Hoist Pendant Control Station (HY-P Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Output Channels: 16 digital points.
- Output Type: Transistor type (typically utilized for high-speed, high-frequency switching tasks where relays would wear out).
- Connection Interface: Terminal/Connector type layout.
- Power Supply Capacity: 50mA from the main controller's DC 5V internal bus.
- I/O Points Occupied: 16 points.
Brand New HCFA HCA8C-16EYT Digital Output Expansion Module (HC-A8C Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Line Count: 2048 pulses per revolution.
- Output Signal: ~1 Vpp sinusoidal voltage signals (with 1 sine and 1 cosine track for absolute position detection per revolution).
- Power Supply: 5 V DC (±5%).
- Shaft Type: Tapered shaft (1 to 10 ratio, functional diameter of 9.25 mm).
- Electrical Connection: 14-pin straight double-row plug connector with a locking mechanism.
- Protection Rating: IP40 environmental protection against dust.
- Operating Temperature: Safe for operation between -40 °C and +120 °C.
Brand New Heidenhain ERN 1387 2048 62S14-70 ID：749144-59 Incremental Rotary Encoder (ERN 1387 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque Range: 0.9 – 4.9 lbf⋅in
- Grip Diameter: 1.3 in
- Tool Length: 8.1 in
- Tool Weight: 0.82 lbs (13.1 oz)
- Clutch Type: Auto Shut-Off
- Operation: Inline Lever Start
Brand New HIOS BLG-4000 Electric Screwdriver. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Clutch Type: Auto Shut-Off
- Torque Range: 0.1 to 0.55 Nm (0.9 to 4.9 lbf·in)
- Speed Range: 690 RPM (Low) to 1,000 RPM (High)
- Drive Type: 4mm bit drive (Note: The "X" variant, BLG-4000XBC1, features a 1/4" Hex drive)
- Safety: ESD Safe antistatic body case
- Weight & Size: 0.37 kg (0.82 lbs) with a length of 206 mm
- Integrated Screw Counter: Tracks cycles in real-time right on the tool, reducing space and setup costs.
- Brushless Motor: Minimizes maintenance, extends tool lifespan, and eliminates carbon dust contamination.
- Error Proofing: Helps operators ensure no screw is missed during multi-fastener sequences.
Brand New HIOS BLG-4000BC1 Electric Torque Screwdriver with Screw Counter (BLG-BC1 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque Range: 0.2 – 1.2 Nm (1.8 – 10.6 lbf·in)
- Speed (Unloaded): 1000 RPM (High) / 690 RPM (Low)
- Drive Type: 4 mm HIOS Wing Drive
- Operation: Dual-activation capability (Lever and Push-to-Start)
- Dimensions: 235 mm (9.3 in) length | 32 – 38 mm diameter
- Weight: 0.425 kg (0.9 lbs)
- ESD Safe: Yes (fully antistatic body case)
- Model Variant: Drive Size / Type
Brand New HIOS BLG-5000 Electric Screwdriver. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Starting Method: Two-way (Push / Lever)
- Unloaded Speed (HI/LOW RPM): 1,000 / 690
- Machine Screw Size: 2.0 – 3.0 mm
- Tapping Screw Size: 2.0 – 2.6 mm
- Standard Bit Drive Type: H4 / H5 / 5HEX / 1/4" Hex
Brand New HIOS BLG-5000BC2 Electric Screwdriver. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque Range: 1.7 – 8.8 lbf·in
- Free Speed (High): 800 RPM (@ 30V DC)
- Free Speed (Low): 500 RPM (@ 20V DC)
- Drive Size & Type: 1/4" Female Hex
- Tool Weight: 21.2 oz (1.3 lbs)
- Tool Length: 8.625 inches
- Grip Diameter: 1.5 inches
Brand New HIOS CL-6000 Electric Screwdriver. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Technology: Film-compensated Super-twisted Nematic (FSTN) monochrome, Black/White negative transmissive display mode.
- Dimensions: Module size is 129.6 x 92.6 x 7.5 mm with an effective active display area of roughly 100.0 x 75.5 mm.
- Backlight: Single Cold Cathode Fluorescent Lamp (CCFL) without an integrated driver.
- Signal Interface: Parallel data (4-bit) via a 12-pin layout.
- Operating Voltage: +5.0V standard logic voltage.
Brand New HITACHI LMG7520RPFC Monochrome FSTN Graphic LCD Module (LMG7520 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Size: 5.7 inches diagonal
- Resolution: 320 × 240 pixels (QVGA)
- Technology: Active Matrix TFT-LCD (a-Si)
- Display Mode: TN, Normally White, Transmissive
- Luminance / Brightness: 350 cd/m² (Typical)
- Contrast Ratio: 350:1 (Typical)
- Backlight Type: CCFL / CCFT (Legacy) (LED replacement variants exist)
- Operating Temperature: -20°C to 70°C (-4°F to 158°F)
- Weight: 1.50 lbs (~0.68 kg)
- Industrial Design: Built with high luminance and a wide viewing angle specifically tailored for demanding plant and factory environments.
Brand New HITACHI TX14D11VM1CBA LCD Screens. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
