Showing 593–608 of 1357 results
-
REQUEST A QUOTE
- Model Designation: Alpha iF 12/3000 (α iF12/4000 series platform configured for 3000 RPM)
- Power Rating: 2.5 kW to 3.0 kW
- Rated Speed: 3000 RPM
- Stall Torque: 12 Nm
- Current Rating: 14 A
- Input Voltage: 3-Phase, 200–240 VAC (50/60 Hz)
- Shaft Type: Straight shaft (no key, no brake)
- Feedback Device: α1000iA absolute encoder / PulseCoder (Part Number: A860-2000-T301)
- Environmental Protection: IP65 standard seals
- Physical Weight: Approx. 20 kg (42.6 lbs)
Brand New FANUC A06B-0243-B100 Precision AC Servo Motor (Alpha i Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model / Type: Beta Series Servo Unit, Type SVU-20
- Interface Type: Fanuc I/O Link Interface
- Single-Phase Input: 220–240 VAC @ 10.1 A, 50/60 Hz
- Three-Phase Input: 200–240 VAC @ 6.3 A, 50/60 Hz
- Rated Output: 240 VAC, 5.9 A
- Control Method: Digital servo control with Incremental Encoder (INC) support
- Compatible Motors: Fanuc βM0.5/4000 (20A), βM1/4000 (20A), β3/3000, β6/2000
- Related Manuals: Functional descriptions in B-65232EN; Maintenance instructions in B-65245EN
- PMC Axis Control: Unlike standard centralized servo drives, the I/O Link drive handles item sequencing internally. The CNC sends a target position/index amount and feed rate, and the amplifier handles zero returns, overtravels, axis clamping/unclamping, and e-stop processing independently before passing a "finish" signal back.
- Indexer Configuration: It features dedicated internal parameters that allow it to act as an indexer (e.g., managing tool magazine positions automatically).
Brand New FANUC A06B-6093-H152 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Number: Alpha Servo Module SVM1-130
- Interface Type: FSSB (Fanuc Serial Servo Bus)
- Rated Input Power: 283–325 VDC, 9.1 kW
- Rated Output Voltage: 230 VAC
- Rated Output Current: 52.2 A (L-Axis)
- Physical Dimensions: 14.0" H x 3.3" W x 11.9" D (380 x 90 x 307 mm)
- Weight: 13.5 lbs (6.12 kg)
- Environmental Tolerances: 0 to 40°C/55°C operating range; 5G vibration resistance
- Official Documentation: Fanuc Maintenance Manual B-65162
- Safety Preparation: If diagnosing a vertical axis, physically prop up or secure the axis. When the motor brake is released during testing, the axis will drop under gravity if unsupported.
Brand New FANUC A06B-6096-H106 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Type: SVM2-80/80 (Alpha Series)
- Interface Type: FSSB Optical Fiber Interface
- Number of Axes: 2 (Dual Axis / Twin Axis)
- Rated Output Current: 18.7 A (per axis)
- Output Voltage: 230 V AC
- Power Rating: 9.5 kW
- Input Voltage Range: 283 – 339 V DC (Power Link)
- Feedback Support: Incremental Encoders (INC)
- Approximate Weight: ~15 lbs (6.8 kg) to 25 lbs (11.3 kg) depending on packaging
- Target Machinery: Primarily integrated into industrial automation setups such as CNC Lathes and CNC Machining Centers.
Brand New FANUC A06B-6096-H208 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Type: Servo Amplifier Module / Alpha i Servo Drive (αiSVM 3-20/20/20i)
- Number of Axes: 3-Axis (Triple Axis management labeled as L, M, and N axes)
- Interface Technology: FSSB (Fanuc Servo Serial Bus) Optical Fiber interface for high-speed CNC communication
- Rated Input Power: 7.5 kW (Note: Core control circuit consumes ~1.5 kW energy)
- Input DC Voltage Range: 283 V DC to 339 V DC
- Output AC Voltage Range: 200 V AC to 240 V AC (Max 240V)
- Rated Output Current: 3A to 6.5A continuous per axis (L, M, N) depending on specific HRV control mode
- Output Frequency Range: 0.1 Hz to 800 Hz
- Position Feedback: INC (Incremental Encoder) support
- Environmental Limits: 0°C to 55°C operating ambient temperature; up to 90% non-condensing humidity
Brand New FANUC A06B-6117-H303 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Component Type: Power Control PCB (PSM Side Board)
- Series Compatibility: FANUC α i Series / α HV i Series
- Input Voltage: 400–480 V AC (High Voltage compatibility)
- Integrated Components: Onboard Noise Filter, 7-Segment Diagnostic LED, Fan Motor (A90L-0001-0441)
- Dimensions: 230 mm × 100 mm × 40 mm (9.05" × 3.93" × 1.57")
- Weight: 0.47 kg (1.26 lbs)
- Environmental Limits: Operating: 0°C to 45°C (32°F to 113°F) | Humidity: 20% to 95% RH
- De-energize the Cabinet: Ensure the main breaker to the CNC machine is fully powered off and locked out. Wait at least 10–15 minutes for the internal high-voltage capacitors on the DC bus to discharge completely.
- Verify Voltage Discharge: Use a calibrated multimeter to check the DC link terminal points (L+ and L-) to verify that residual voltage has dropped below safety thresholds (<50V) before removing the module cover.
- Inspect the Fan Assembly: This board depends on the attached A90L-0001-0441 fan to prevent thermal cutoff. Ensure the fan moves freely and is clear of machining grease/debris during installation.
Brand New FANUC A20B-2101-0390 Control Board. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Part Number: A660-2004-T411
- Length: 10 Meters (10M)
- Connector Type: 20-pin MR-style male connector to the pendant interface
- Cable Properties: Shielded (to protect against electrical noise/interference), oil-resistant, dust-resistant, and built for heavy handling in high-flex factory environments.
- Compatible Controllers: R-J3 and R-J3iB
- Common Robot Models: Arc Mate 100i, Arc Mate 120i, M-6i, M-16i, M-710i, R-2000i, S-420i, and LR Mate 100i.
- Details: Includes a 30-day return policy and standard factory testing.
- Details: Guarantees OEM-spec industrial shielding and exact 20-pin alignment.
Brand New FANUC A660-2004-T411 10M Cable. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Signal Type: Incremental
- Resolution: 100 pulses per revolution (PPR), outputting standard two-phase quadrature signals (A/B phases)
- Power Supply: DC 5V (standard TTL line-driver level compatible with FANUC controllers)
- Shaft Design: Tapered and keyed shaft configuration for steady, slip-free physical integration without an external mounting flange
- Dimensions: Approximately 4.5 × 3.5 × 2.5 inches (114.3 × 88.9 × 63.5 mm)
- Weight: 1.45 lbs (0.66 kg)
- Direct Legacy Replacements: It directly supersedes model numbers A860-0201-T002, A860-0202-T001, A860-0202-T002, and A860-0202-T003.
- Cross-Brand Equivalent: It functions identically to the industry-standard Tosoku RE46A1 handwheel encoder.
- Pinout Verification: Before replacing an older A860-0202 series wheel, confirm your terminal block arrangements. While the internal 100 PPR A/B quad-phase logic matches, pin designations on legacy wire bundles can differ slightly.
- Voltage Safety: Ensure the terminal board is restricted to a clean 5V DC loop. Do not hook this up to standard 24V I/O power, as overvoltage will permanently blow out the internal line-driver differential chips.
Brand New FANUC A860-0203-T001 Handwheel. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
- Manufacturer: FANUC
- Model / Part Number: A860-2000-T301
-
REQUEST A QUOTE
- Component Type: Absolute Pulse Coder / Rotary Encoder
- Encoder Model: Beta 128iA (β iA128)
- Environmental Rating: IP67 Waterproofed (Features an integrated O-ring in the flange groove for wet machining environments)
- Connection Interface: 10-Pin Circular Connector
- Physical Weight: Approximately 0.64 lbs / 0.29 kg
Brand New FANUC A860-2020-T321 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Encoder Type: Absolute Pulse Encoder / Pulse Coder (Beta i A128 / BiSc System)
- Rated Voltage: 5 V
- Rated Current: 0.1 A
- Connector Type: Integrated male plug connection
- Compatibility: Designed for FANUC AC Servo Motor Beta models. The newer flat-profile design variant maintains backward compatibility with older form factors.
- Country of Origin: Japan
Brand New FANUC A860-2020-T361 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: FANUC (Japan)
- Model / Part Number: A860-2051-T321 (Also written as A8602051T321)
- Component Type: Electromechanical Rotary Encoder (Pulsecoder)
- Feedback Technology: Optical Sensing
- Encoding Type: Absolute (α i A32000) — retains position data through power cycles
- Application Ecosystem: FANUC α i-B Series Servo Motors & CNC Systems
- Output / Signal Type: Digital
- Termination Type: Integrated Cable
- Mounting & Actuator: Surface Mount / Shaft
- Estimated Weight: ~1.00 to 2.00 lbs (~0.45 to 0.91 kg)
Brand New FANUC A860-2051-T321 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
Technical Specifications
- Model/Type: β iA1000 Absolute Pulse Coder
- Encoding Type: Absolute (retains machine position data via backup battery/system parameters)
- Sensing Technology: Optical
- Mounting/Shaft Type: Tapered shaft mounting
- Output Signal: Digital, differential A/B/Z outputs
- Weight: Approximately 1.54 lbs (0.70 kg)
- Terms: Sold in new condition; explicitly noted as a non-returnable part.
- Source Page: Available directly on Eisen Machinery.
- Standout Feature: Comprehensive coverage and speed.
- Terms: New condition, 100% tested with state-of-the-art diagnostic equipment, includes a 12-month warranty. Next-Day Air shipping options are available if you contact them before checkout. They also offer "Core Exchange Credits" if you ship back your broken encoder.
- Source Page: View listing on CNC Tools LLC.
- Standout Feature: Long-term warranty support.
Brand New FANUC A860-2070-T321 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: FANUC (Japan)
- Part Number: A860-2150-V001
- Sensor Type: BZI Sensor (Built-in ZI) Head Assembly
- Output Signal: Analog Pulse Transmission
- Gear/Teeth Resolution: 512 Teeth / Pulses
- Cable Length: 1.2 Meters (~3.94 feet)
- Mounting Style: Flange Mount (Direct motor-mounted)
- Physical Weight: ~0.60 lbs / 0.27 kg
- Motor Compatibility: FANUC α i and α iBZ Series AC Spindle Motors
- Harmonized Code (HS): 85030090
Brand New FANUC A860-2150-V001 Rotary Encoder. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Total I/O Points: 10 Points total (Fixed configuration, non-expandable for the 10 I/O base unit)
- Digital Inputs: 6 Points 24VDC digital inputs
- Digital Outputs: 4 Points Transistor Source (PNP type) outputs
- Power Supply: 100 ~ 240VAC wide-range AC power
- Built-in Com Ports: 1x RS-232 communication port (Port 0)
- Clock Feature: Integrated Real-Time Clock (RTC) included
- FBs: Series identifier (FATEK advanced micro-PLC architecture).
- MA: Economy/Basic Main Unit type.
- AC: Powered by 100~240VAC line power (Note: D24 variants utilize 24VDC).
- Software Ecosystem: This unit is programmed using FATEK's proprietary, free utility software WinProladder (Version V3.30 or newer).
Brand New FATEK FBS-10MAJ2-AC PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Code: FBs-10MAJ2-D24
- Series: FBs Series (MA Economy Type)
- Total I/O Points: 10 Points
- Digital Inputs: 6 Inputs (24VDC)
- Digital Outputs: 4 Outputs
- Output Type: Transistor Source (PNP)
- Power Supply: 24VDC
- Communication: 1 Built-in RS-232 port (Expandable up to 5 ports total)
- Integrated Features: Real-Time Clock (RTC)
- Software Support: WinProladder V3.30 or higher (Free Download)
Brand New FATEK FBS-10MAJ2-D24 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
