Showing 1169–1184 of 1357 results
-
REQUEST A QUOTE
- Manufacturer: Telemecanique Sensors (Schneider Electric)
- Component Type: Latching Emergency Stop Rope Pull Switch
- Contact Configuration: 2 NC + 1 NO (Slow-break)
- Maximum Cable Span: Up to 30 meters
- Reset Operation: Booted pushbutton
- Local Signaling: Without pilot light
- Electrical Rating: 240V AC max / 250V DC max
- IP Protection Rating: IP65 (Dust-tight and water-jet resistant)
- Operating Temperature: -25°C to +70°C
- Housing Material: Stainless Steel / Heavy-duty metal
Brand New SCHNEIDER XY2CH13290 Emergency Pull-Cord Limit Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Slot Type: C-slot (integrated directly into the component's tracking)
- Number of Switching Points: 2 programmable switching points (allows a single sensor to monitor multiple positions like "open" and "closed")
- Switching Logic / Output: PNP, Closer / Normally Open (NO)
- Nominal Voltage: 24 V DC (Operational range: 12 V to 30 V DC)
- Maximum Switching Current: 100 mA (0.1 A)
- Voltage Drop: 2.2 V
- Typical Switching Time: 0.001 seconds (1 ms)
- Electrical Connection: M8 connector
- Cable Length: 600 mm (60 cm)
- Cable Characteristics: 4 wires, 0.08 mm² wire cross-section, 2.6 mm cable diameter
Brand New SCHUNK MMS-P22-S-M8-PNP 0301370 Proximity Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Capacity: 12TB
- Rotational Speed: 7,200 RPM
- Cache: 256MB
- Interface: SATA 6.0 Gb/s
- Form Factor: 3.5-inch standard desktop/server drive
- Heavy-Duty Workload Rating: Supports workloads up to 550TB/year, which is roughly 3 times the workload limit of standard desktop or entry-level surveillance drives.
- ImagePerfect AI Firmware: Optimizes write throughput to prevent dropped frames while simultaneously handling up to 64 HD video camera streams and 32 additional AI analytics streams.
- Multi-Drive Reliability: Built-in Rotational Vibration (RV) sensors mitigate the vibrations caused by neighboring drives, making it highly stable in 16+ bay NVR systems.
- Longevity: Rated for 1 million hours MTBF (Mean Time Between Failures) to handle always-on, 24/7 operating cycles.
- Surveillance (NVR/DVR): Highly recommended. In video recording, missing a single pixel frame due to write timeouts is acceptable as long as the stream never chokes or crashes.
Brand New Seagate 12TB ST12000VE0008 Surveillance Hard Drive (SkyHawk AI Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Interface & Power: Uses a USB 2.0 interface and is completely USB bus-powered, eliminating the need for an external power supply.
- Performance: Offers high-speed Real-Time Data Exchange (RTDX) with transfer rates exceeding 2 MB/sec. It provides code download rates of 512 KB/sec, making it roughly 10 to 20 times faster than legacy XDS510-class emulators.
- Clock & Voltage Handling: Features a self-adaptive clock ranging from 500 kHz to 35 MHz / 50 MHz. It includes auto-sensing voltage support matching TI's device roadmap from 0.5V to 5V.
- Target Connection: Equipped with a standard 14-pin JTAG header (often bundled with a 14-to-20 pin adapter).
- Supported IDEs: Fully compatible with legacy versions of TI Code Composer Studio (CCS), explicitly supporting CCS V2.2, V3.x, V4, and V5.
- Operating Systems: Originally compiled for older Windows environments, officially supporting Windows 2000, XP, and Vista.
- Product Overview: SEED-XDS560PLUS is a DSP development tool (DSP emulator) developed by SEED. It supports TI's LF24XX,. F28XX, C50…
Brand New SEED SEED-XDS560PLUS DSP Hardware Emulator (XDS560 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Download Speeds: Up to 1.0 MB/s for rapid firmware flashing.
- Interface Compatibility: Supports JTAG, SWD, SWV/SWO, and fine-grain electrical architectures.
- Target Voltage Range: Wide operational spectrum from +1.2V to +3.3V (+5V tolerant).
- PC Interface: Driven entirely via Hi-Speed USB 2.0 (no external power brick required).
- Physical Footprint: Compact design measuring 100mm x 53mm x 27mm.
- J-Flash / J-Flash SPI: For industrial-grade production line flash memory programming.
- Unlimited Flash Breakpoints: Overcomes hardware breakpoint limitations when debugging code directly inside flash memory.
- Ozone Debugger: A standalone graphical debugger and performance analyzer.
- Real-Time Transfer (RTT): Enables lightning-fast, bidirectional interactive communication with the target application without blocking runtime.
Brand New SEGGER J-Link Plus 8.08.28 JTAG SWD Debug Probe (J-Link Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Download Speed: Outstanding speeds up to 4 MB/s into target RAM.
- Host Connectivity: Dual-interface supporting both Hi-Speed USB 2.0 and 10/100 Ethernet.
- Cross-Platform: Out-of-the-box driver and software compatibility with Windows, Linux, and macOS.
- Target Interface Support: Broad coverage including JTAG, cJTAG, SWD, SWO, and direct SPI flash interfacing.
- Unlimited Flash Breakpoints: Overcomes hardware breakpoint limitations, allowing you to set as many breakpoints as necessary inside internal or external flash memory.
- J-Flash: A powerful standalone suite for programming flash memory on Cortex-M/R/A, RX, and RISC-V targets.
- Ozone: SEGGER’s flagship graphical debugger and performance analyzer for precise instruction tracing and code optimization.
- Comparison: J-Link PRO vs. J-Link PRO PoE
- Feature / Variant: J-Link PRO (Standard)
- Primary Use Case: Universal debug probe for individual long-distance desk setups or remote targets.
Brand New SEGGER J-LINK PRO Programmer. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Voltage Rating: 1200 V
- Current Rating: 35 A to 54 A (depending on operating temperature parameters)
- Topology: CIB (Converter, Inverter, Brake)
- Housing Type: MiniSKiiP II 2 (Dimensions: 59 x 52 x 16 mm)
- Chip Technology: IGBT 4 (Trench)
- Maximum Operating Temperature: 175°C
- Connections: Highly reliable spring contacts for solder-free electrical connection
Brand New SEMIKRON SKIIP24NAB12T4V1 IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Voltage Rating: 1200V
- Current Rating: 83A to 85A (nominal continuous; peak performance scales up to 128A under certain operating conditions).
- Switching Frequency: Up to 20kHz.
- Integrated Components: Features an integrated IGBT bridge, an onboard gate driver, and a built-in temperature sensor.
- Compliance: Lead-free and RoHS compliant.
- Motor Drives: Controlling speed, torque, and power in industrial motors.
- Power Supplies: Regulating high-power UPS (Uninterruptible Power Supply) setups.
- Renewable Energy: Power management for solar/wind inversion.
- Welding Machines: Managing high-current power stages.
Brand New SEMIKRON SKIIP83AC128IST1 IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Package Type: SEMITRANS 3 compact footprint with an electrically isolated baseplate (≥2500 V AC)
- Operating Temperature: –40 °C to +150 °C
- Motor Drives: Three-phase AC motor drives and variable frequency drives (VFDs).
- Renewable Energy: Solar inverters and grid-tied wind converters.
- Power Supplies: High-frequency DC-DC converters and large industrial UPS systems.
- Industrial Heating: Induction heating and welding equipment.
Brand New Semikron SKM400GB128D Half-Bridge IGBT Power Module (SKM Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Rating: 400 W nominal continuous power capability.
- Input Voltage: 120 / 240 VAC, supporting 1-phase (10A max) or 3-phase (5.8A max) systems at 50/60 Hz.
- Output Rating: 0–240 VAC, 3-phase, continuous output current of 6 Amps.
- Frequency Range: 0–599 Hz (older variations list up to 1000 Hz).
- Enclosure Protection: IP20 / Type 1 rating (indoor industrial environments).
- Repair Solutions: Hardware failures on these drives (e.g., blown power stages, control board issues) can frequently be resolved by component-level technicians. Specialized repair firms such as Synchronics Electronics offer diagnostics and rebuild capabilities for this specific part number.
- Successor Models: If replacing an entire line, look to the newer CDHD2 series (e.g., CDHD2-0062AEC2), which provides enhanced processing speeds and matching functional form-factors.
Brand New Servotronix CDHD-0062AEC2 Digital Servo Drive (CDHD Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Rating: 200 W nominal capacity.
- Control Loop Frequency: Industry-leading current loop frequency response up to 3 kHz.
- Feedback Compatibility: Supports multiple feedback systems, including incremental encoders, serial absolute encoders (sensAR, Tamagawa), Hall sensors, and resolvers.
- Safety Integration: Features integrated STO (Safe Torque Off) functional safety circuitry.
- Commissioning Software: Setup and automatic loop tuning are managed via the Servotronix ServoStudio GUI.
Brand New SERVOTRONIX CDHD-1D52AAP1 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Input Voltage: Supports 120–240 VAC (Medium Voltage "MV" series models).
- Current Loop Performance: Features an advanced current loop design delivering an ultra-fast frequency response of 3 to 5 kHz.
- Feedback Compatibility: Interfaces with multiple feedback devices and includes a secondary encoder interface for dual-loop control.
- Safety & Compliance: Features integrated Safe Torque Off (STO) safety circuitry alongside CE and UL listings.
- Software Interface: Uses the proprietary ServoStudio™ GUI for visual tuning and rapid commissioning.
Brand New SERVOTRONIX CDHD-1D52AEB2 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Input Voltage: 120 / 240 VAC (Single or Three Phase), 50/60 Hz
- Continuous Current: 1.5 A RMS
- Peak Current: 4.5 A RMS (up to 2 seconds duration)
- Current Loop Frequency: Industry-leading 3 to 5 kHz
- Feedback Types Supported: Incremental encoder, absolute encoder (BISS, EnDat, Hiperface), sensAR, resolvers
- Safety Features: Integrated Safe Torque Off (STO)
- Control Software: Programmed via Servotronix ServoStudio Software
- User Manual: Refer to the CDHD2 Servo Drive User Manual for precise pinout assignments and parameter mapping.
- Bus Integration: For network master configuration, download the CDHD2 EtherCAT Manual.
- CAD Models: The repository includes 2D drawings and 3D STP files for mechanical panel layout planning.
Brand New SERVOTRONIX CDHD2-0102AEC2 Servo Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: SEW Eurodrive
- Brake Model: BMG8
- Operating Voltage: 230 VAC
- Maximum Braking Torque: 75 Nm
- Breaking / Coil Power: 70 W
- Holding Current: 0.4 A
- Outer Diameter: 180 mm
- Motor Frame Compatibility: Typically fits SEW motor sizes DV112 M and DV132 S.
- Commodity / HS Code: 85030090
Brand New SEW Eurodrive BMG8 75nm 230VAC Motor Brake Coil (BMG Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Type: BGE 1.5 (typically distinct by its red color enclosure)
- Part Number: 825 385 4
- Input Voltage Range: 150 V to 500 V AC
- Max Output Current: 1.5 A DC
- Switching Style: One-way rectifier with integrated electronic switching
Brand New SEW-EURODRIVE BGE1.5 8253854 Rectifier. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Part Number: 1820 403 1 (or 18229150)
- Interface: 21-key keypad with a multi-line illuminated LCD text display.
- Power Supply: 24 V DC (powered directly via the inverter interface).
- Enclosure Rating: IP40 protection class (some variants list IP20).
- Parameter Copying: You can extract a complete parameter set from an inverter using the COPY TO DBG menu command, move the keypad to a different inverter, and flash it using COPY TO MDX.
- Manual Motor Control: When within safe visual sight of the application, the Start and Stop keys can be used to manually jog or run the motor.
- Diagnostics & Fault Reset: Displays specific system fault codes and descriptions. Faults can be cleared manually by navigating to parameter 840 (Reset) and toggling it to "Yes".
- User Menu Customization: Allows users to map a custom menu containing up to 50 frequently accessed parameters for quick navigation.
- Merchant / Platform: Condition
Brand New SEW-EURODRIVE DBG60B-01 Controller. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
