Showing 1105–1120 of 1357 results
-
REQUEST A QUOTE
- Series: Pilz PNOZ X Series
- Outputs: 2 Normally Open (N/O) instantaneous safety contacts
- Inputs: 1/2-channel wiring configuration with or without cross-circuit short detection
- Physical Profile: 45 mm compact width, designed for DIN rail railing mounting
- Terminals: Integrated fixed screw termination
- Safety Ratings: Up to SIL 3 / PL e / Cat. 4 depending on installation wiring
- E-STOP Pushbuttons: Detects dual-channel or single-channel emergency stop breaks.
- Safety Gates: Monitors interlocking switches or limit switches on machine guards.
- Pressure-Sensitive Mats: Configured to monitor short-circuit principle safety mats.
- Feedback Loop: Built-in capability to monitor external relays or contactors.
Brand New PILZ 774066 Safety Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Adjustable Pressure Range: 0.1 to 0.8 MPa (14.5 to 116 PSI).
- Max Supply Pressure: 1.0 MPa (145 PSI).
- Features: Built-in pressure gauge (5% accuracy), integrated pressure relief mechanism for easier downstream adjustments.
- Differences: RVUM6-6 vs. RVUMP6-6 (Successor)
- Higher Flow Capacity: The new design enables roughly 1.3 times higher flow rate than the legacy model.
- Improved Stability: Features a push-lock setting knob and a reduced set pressure fluctuation range.
- Form Factor: Keeps the same 6mm inline configuration for an easy drop-in replacement.
Brand New PISCO RVUM6-6 Throttle Valve. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series Type (MSA): Heavy Load Type featuring a 45° ball contact angle. This configuration allows the block to bear equal radial, reversed radial, and lateral loads seamlessly in any mounting orientation.
- Block Type (S): Square type carriage with a compact width, designed to be securely installed from the top side.
- Dimensions: Measures approximately 28mm (Height) × 34mm (Width) × 56.3mm (Length).
- Sealing & Preload Code (SSSFCN): Indicates specific end seals, side seals, inner seals, and a light-to-medium balanced preload designed to optimize rigidity while minimizing friction.
- HIWIN: HGH15CA
- NSK: NSRH15BZ
Brand New PMI MSA15SSSFCN Linear Guide. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- MSB: Series name representing a compact type linear guideway with a 45-degree four-row ball train contact angle.
- SS: Standard seals equipped at both ends to prevent dust contamination and retain lubricants.
- FCN: Part designation indicating high-accuracy carbon steel material construction and standard manufacturing precision clearance.
- Height (Assembly H): 28 mm
- Width (W): 42 mm
- Length (L): 67 mm
- Patented Lubrication Trajectory: Houses a specialty internal lubrication route ensuring grease or oil is divided evenly across all recirculation loops, improving reliability and running accuracy.
Brand New PMI MSB20SSSFCN Linear Guide. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Type: 10.4-inch TFT Color LCD, supporting up to 64 colors.
- Resolution: 640 x 480 pixels (VGA).
- Power Supply: 24V DC input (allowable range ±20%).
- Power Consumption: 50W or less (typically around 20W).
- Dimensions: 317mm x 243mm x 85mm.
- Environmental Protection: Meets NEMA 4X/12 and IP65f ratings, providing excellent protection against water and dust in harsh factory environments.
- Configuration Software: Programmed using standard Pro-face legacy software, specifically GP-Pro/PBIII.
- Same Cutout Size: For a drop-in physical replacement without cutting into your cabinet panel, use the SP5000 Series combined base and panel modules (e.g., PFXSP5600TPD paired with PFXSP5B10).
- Different Cutout Size: The GP4000 Series (PFXGP4501TMD) acts as a highly functional software replacement but features alternative physical dimensions.
- Product Description P/N: GP577R-TC41-24VP * Description. The GP577R-TC41-24VP is a 10.4-inch operator interface from Pro-Face. It …
Brand New PRO-FACE GP577R-TC41-24VP Touch Screen. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Schneider Electric Pro-face
- Series / Model: GP4000E Series / GP-4502WW
- Display Type: TFT Color LCD with Analog Resistive Touch Film
- Screen Size: 10.1-inch Widescreen (Effective area: 219.6 x 131.76 mm)
- Resolution: 800 x 480 pixels (WVGA)
- Display Colors: 65,536 colors
- Backlight Type: LED (Service life ≥ 20,000 hours with 8-level brightness control)
- Input Voltage: 24 VDC (Power consumption ≤ 10 W)
- Application Memory: 32 MB Flash EPROM (128 KB Flash EPROM backup memory)
- Cooling Method: Natural air circulation (no cooling fans)
- Front Panel Rating: IP65F / Enclosure Type 4 Indoor Use Only
- Ethernet: 10/100 Base-T port for networking, PLC connectivity, and remote monitoring.
- USB Ports: 1 x USB 2.0 Type-A (for data logging and storage) and 1 x USB 2.0 mini-B (for project transfer).
- Programming Software: Managed via GP-Pro EX Software, which allows configuration for animations, alarm analysis flows, XY graphs, and multi-device drivers.
- Remote Supervision: Supports remote monitoring and data acquisition via GP-Viewer EX software.
- Mounting Options: Can be seamlessly integrated into panels using either landscape or portrait orientation layouts.
Brand New Pro-Face PFXGP4502WADW Widescreen HMI Panel (GP4000E Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Backplane Power Consumption: 5 VDC, maximum 1100 mA.
- Operating Temperature: 0°C to 60°C (32°F to 140°F).
- Lifecycle Status: Discontinued by Manufacturer (Categorized as a legacy product by ProSoft Technology).
- Integration Capabilities: Operates using comDTM technology, making it compatible with asset management applications like PACTware and Endress+Hauser FieldCare.
- Legacy Drop-in Context: It offers similar capability and performance to the legacy Modicon 140 CRP 811 00 module, though it requires project configuration modifications rather than being a direct physical substitution.
- Configuration Process: Configured via the ProSoft Configuration Builder (PCB) software, which defines data block sizes, node mapping, GSD files, and CPU start registers. It transfers diagnostic data, acyclic reads/writes, and handles Hot Standby network syncing.
Brand New Pro-Soft PTQ-PDPMV1 PROFIBUS DP Master Module (PTQ Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Protocol Support: PROFIBUS DPV1 (Cyclic I/O data and acyclic messaging).
- Hardware Form Factor: In-chassis module for 1769 CompactLogix systems (slots into the local I/O bank or remote 1769 expansion racks).
- Configuration Interface: Integrated via Studio 5000 / RSLogix 5000 as a standard I/O module using an Add-On Profile (AOP).
- Physical Hardware Address: Equipped with rotary switches to easily set the node's PROFIBUS bus address.
- Remote Access: The dedicated Ethernet port eliminates the need to plug directly into the module hardware on the plant floor; configuration and advanced troubleshooting can be handled over the plant network.
- Seamless PLC Integration: Appears to the CompactLogix controller as standard native I/O. Explicit CIP ladder logic message blocks handle slave status diagnostics and acyclic DP-V1 data commands.
- Configuration Flexibility: The module can automatically adapt to parameters downloaded from the PROFIBUS network Master or follow configuration locked down locally by the Logix processor.
Brand New ProSoft ILX69-PBS PROFIBUS Slave Module (ILX69 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Input Voltage Range: 18 – 32.4V DC (24V DC nominal)
- Output Voltage: 12 – 15V DC (Adjustable)
- Output Current: 8A (at 12V) to 6.4A (at 15V)
- Output Power: 96W nominal
- Efficiency: Up to 88.2%
- Dimensions: 32mm Width x 124mm Depth x 102mm Height
- Power Reserves: Includes a 20% PowerBoost feature, allowing it to continuously deliver up to 115W at ambient temperatures up to +45°C.
- Electrical Isolation: Features safe galvanic isolation between the input and the output circuits.
- Circuit Protection: Built-in soft-start function to minimize inrush current spikes, paired with reverse input polarity protection.
Brand New PULS CD5.121 Switching Power Supply. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Output Voltage: 24V DC (manually adjustable from 24–28V DC via front potentiometer)
- Output Current: 10A at 24V (continuous output)
- Power Reserve: 20% PowerBoost (delivers up to 12A / 288W continuously at ambient temperatures up to +45°C)
- Input Voltage: Single-phase 115/230V AC with auto-select input, preventing mis-wiring damage
- Efficiency: Reaches up to 91.6% efficiency with low heat generation
- Physical Profile: Only 60mm wide, maximizing control panel space
- Connections: Heavy-duty screw clamp terminals
Brand New Puls CS10.241 Single-Phase DIN-Rail Power Supply (DIMENSION C-Line Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Output Power: 30 Watts
- Output Voltage: 24V DC (adjustable from 24–28V DC)
- Output Current: 1.3A at 24V; 1.1A at 28V
- Input Voltage Range: 85–264V AC (Single-phase) or 88–375V DC
- Efficiency: Up to 87.5%
- Form Factor: Compact 45mm width rugged plastic housing
- Termination Type: Toolless, quick-connect spring-clamp terminals
- Operating Temperature: Full output power performance between -10°C and +60°C (derating up to +70°C)
- Certifications: UL508 Listed for industrial control equipment, NEC Class 2 compliance, and CE.
- Automation Distribution: Stocked for industrial applications via Automation Distribution.
Brand New PULS ML30.100 Switching Power Supply. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensor Type: Contactless 80 GHz Radar Level Sensor
- Model / Series: VEGAPULS 31 (PS31.XXXXXGMHB)
- Measuring Range: Up to 20 meters (65.6 ft)
- Accuracy: ±2 mm
- Output Signal: 4-20 mA / HART (2-wire loop powered)
- Process Connection: 1.5" G/BSP threaded mounting
- Housing Material: PVDF body with Fluorelastomer seals
- Technology: 80 GHz high-frequency radar for non-contact measurement
Brand New Vega RA-222229 Radar Level Transmitter (VEGAPULS 31 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Dimensions: 220 mm × 220 mm × 60 mm (commonly categorized as a 22cm or 22060 frame size).
- Frame Material: Heavy-duty die-cast aluminum frame.
- Voltage Options: Most commonly found in 220V–240V AC configurations (50/60Hz), though a 100V–125V AC variant exists for lower voltage electrical grids.
- Current Draw: 0.42A to 0.46A depending on frequency.
- Wiring: Standard 2-wire setup, available with either terminal connectors or lead wires.
- Bearing & Protection: Features a high-flow design typically built with high-temperature resistance suited for continuous industrial operation.
Brand New XINRUILIAN RAH2260B2-C AC Axial Cooling Fan (RAH2260 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Red Lion Controls
- Display Type: 8-digit LCD with user-selectable red or green backlighting (0.46" / 11.7mm digit height)
- Input Frequency: Up to 20 kHz max
- Supply Voltage: 9 to 28 VDC
- Environmental Protection: NEMA 4X / IP65 front panel (water/dust resistant)
- Operating Temperature: -35°C to +75°C
- Counting Modes: Bi-directional counting, up/down control, quadrature sensing, batch counting
- Dynamic Color Changes: You can program the backlight to automatically switch from green to red (or vice versa) when a specific preset limit is reached.
- Modular Expansion: Built-in capabilities can be enhanced using plug-in optional cards available from Red Lion:
- Brand: Red Lion. Part Number # : CUB5B000. SKU #:, 2143103. Dimensions: 1.54 in H x 2.95 in W x 1.71 in D. Frequency Rating: 20 kH…
Brand New Red Lion CUB5B000 Dual Counter Rate Indicator (CUB5 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Size: 25
- Format Type: FNS (Flange, Normal length, Standard height)
- Material: Unalloyed carbon steel (CS)
- Preload Class: C1 (Low / Light preload)
- Accuracy Class: N (Normal / Standard grade)
- Dynamic Load Capacity (C): 28,600 N to 36,036 N (depending on testing standard benchmarks)
- Weight: 0.669 kg
- F (Flanged): Extended flanged mounting surface that allows attachments to be secured from either above or below.
- N (Normal): Standard block body length optimizing space and load requirements.
- S (Standard): Standard overall assembly height when paired with compatible guide rails.
Brand New REXROTH R165121420 Bearing. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Material: Carbon Steel (CS)
- Block Width: 70 mm
- Block Length: 86.2 mm
- Overall Height: 29.9 mm (36 mm assembled on rail)
- Dynamic Load Capacity (C): 28,600 N (28.6 kN)
- Maximum Speed: 5 m/s
- Maximum Acceleration: 500 m/s²
- Weight: ~0.7 kg
- High Precision: Features a patented entry zone design that increases travel smoothness and accuracy by a factor of six.
- Low Maintenance: Shipped pre-lubricated with roller bearing grease (Dynalub) and includes built-in all-round sealing to keep out contaminants.
Brand New REXROTH R165129420 Bearing. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
